- SSCNET conversion unit
DG2GWY13
- Features
- Specifications
- External Dimensions・
Product CAD Data - Wiring diagrams and connection examples・
Note - Catalogs・
New Product Releases - Manual
- Technical information
（Technical News） - Downloads
- Video
- Related products
Features
-
- Product overview:
- Devices for servo system upgrade:SSCNET conversion unit
- Merit.1
- By using the SSCNET conversion unit DG2GWY13, the MR-H-B, MR-J2-B, MR-J2S-B or MR-J2M-B servo ampifiers in the same line can all be upgraded to the MR-J4-B series. (Partial upgrade of the servo amplifiers in the same line is not possible.)
- Merit.2
- Since two SSCNET lines (up to 16 axes in total) for the same controller can be upgraded to one SSCNET III/H or SSCNET III line (up to 16 axes in total), two SSCNET lines can be upgraded to SSCNET III/H or SSCNET III with one SSCNET conversion unit.
- Merit.3
- The A/QN Motion controller and the servo amplifiers/servo motors can be upgraded separately, so the machine suspension time is shorter than when upgrading the control system and the drive system at the same time.
- Merit.4
- Existing design assets can be inherited using MELSOFT MT Works2.
- Merit.5
- To use the products given in this publication properly, always read the relevant manuals before beginning operation.
| Sales status | On sale |
|---|
Basic specifications
| Item | Specifications | |
|---|---|---|
| Model | DG2GWY13 | |
| Category | Upgrade tool products | |
| Connected device | servo amplifier | |
| Series of connected devices | [SSCNET III/H compatible] MR-J4-B、MR-J4W2-B、MR-J4W3-B [SSCNET III compatible (*)] MR-J4-B(J3 compatibility mode)、MR-J4W2-B(J3 compatibility mode)、MR-J4W3-B(J3 compatibility mode)、MR-J3-B、MR-J3W-B |
|
| Product category | Upgrade tool products for servo | |
Specifications
General specifications
| Item | Specifications | |
|---|---|---|
| Operating ambient temperature | 0 to 55°C | |
| Storage ambient temperature | -25 to 75°C | |
| Operating ambient humidity | 5 to 95%RH, non-condensing | |
| Storage ambient humidity | 5 to 95%RH, non-condensing | |
| Vibration resistance(Under intermittent vibration) | 5 to 9Hz : Half amplitude：3.5mm | |
| 9 to 150Hz : Constant acceleration：9.8m/s2 | ||
| No. of sweeps : 10 times each in X, Y and Z directions (for 80 minutes) | ||
| Vibration resistance(Under continuous vibration) | 5 to 9Hz : Half amplitude：1.75mm | |
| 9 to 150Hz : Constant acceleration：4.9m/s2 | ||
| Vibration resistance(UApplicable standards) | JIS B 3502,IEC 61131-2 | |
| Shock resistance | 147m/s2, 3 times each in X, Y and Z directions | |
| Shock resistance(Applicable standards) | JIS B 3502, IEC 61131-2 | |
| Operating atmosphere | Free from corrosive gas | |
| Operating altitude | 2000m or less | |
| Installation location | Inside cabinet | |
| Overvoltage category | II or lower *1 | |
| Pollution degree | 2 or less *2 | |
| Remarks | *1：Indicates the power distribution section to which the device is assumed to be connected, between the public power grid and the machinery within the premises. Category II applies to the devices that are supplied with power from fixed facilities. The surge withstand voltage is 500V for devices with ratings up to 50V. |
|
| *2：Indicates the extent to which conductive substances are found in the device operating environment. Pollution degree 2 indicates an environment in which normally only nonconductive pollution occurs and the temporary conductivity caused by accidental condensation is to be expected. | ||
Product specifications
| Item | Specifications | |
|---|---|---|
| Number of control axes | 16 axes (16 axes per line x 1 line) | |
| Communication cycle (Input) | SSCNET：3.555ms to 14.222ms (A/QN Motion controller compatible) | |
| Communication cycle (Output) | SSCNET III/H (SSCNET III)：3.555ms (A/QN Motion controller compatible) | |
| Power supply | 20.4 to 26.4VDC (ripple rate within 5%) | |
| Current consumption | 24VDC, 0.2A | |
| Recommended 24VDC power supply | IDEC CORPORATION PS5R-SB24 | |
| Communication function | USB: For communication with personal computer | |
| Compliance with global standards | CE, UL / cUL | |
| Structure | Natural cooling, open (IP20) | |
| Mounting (Screw fixing) | M5 × 10mm or more, tightening torque: 78 to 118N・cm | |
| Mounting (DIN rail) | Applicable DIN rail: TH35-7.5Fe, TH35-7.5Al (IEC60715 compliant) | |
| External dimensions (H)×(W)×(D) ［mm］ | 168×30×100 | |
| Mass (g) | 260 | |
External Dimensions・Product CAD Data
External Dimensions
N/A
| Name | Filename |
|---|
Product CAD Data
| Name | Filename |
|---|---|
| Dimensions（CAD 2D） | sales_fa_meefan_dg2gwy13.dxf（1MB） |
Wiring diagrams and connection examples・Note
Wiring diagrams and connection examples
N/A
| Name | Filename |
|---|
Other Technical Information
N/A
| Name | Filename |
|---|
Precautions for use
N/A
| Name | Filename |
|---|
Catalogs・New Product Releases
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|---|---|---|
| FA Goods General Catalog Digest edition（28MB） | English | MEIC198E_209-B | March 2024 |
| FA关联产品 综合目录 摘要版（29MB） | Simplified Chinese | MEIC199C_209-B | March 2024 |
| FA Goods General Catalog Upgrade Tool Products（23MB） | English | MEIC206E_20Y-C | July 2024 |
Manual
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|---|---|---|
| User's Manual (Hardware)（434KB） | English | 50GR-041201E-H | May 2023 |
| User's Manual (Detailed)（5MB） | English | 50GR-041197E-J | September 2023 |
Technical information（Technical News）
N/A
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|
Downloads
N/A
Profile/module FB (function block)
| Name | Filename |
|---|
Control & Communication System Profile CSP+
| Name | Filename |
|---|
Sample program
| Name | Filename |
|---|
Video
N/A
Related products
Connection cables
| Model | Length | Name | Overview |
|---|
Related products
N/A
