-
For MELSEC positive common input/sink output
(FCN 40P connector and MIL 40P connector)
FA-CBL100FMV
- Features
- Specifications
- External Dimensions・
Product CAD Data - Wiring diagrams and connection examples・
Note - Catalogs・
New Product Releases - Manual
- Technical information
（Technical News） - Downloads
- Video
- Related products
Features
-
- Product overview:
- Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable.
- Merit.1
- This cable is used to connect a MELSEC series FCN 40P connector type I/O module and a MELSEC-dedicated 32-point junction terminal block.
- Merit.2
- A round 40-core cable is vertically connected to an FCN 40P connector. The other cable end is connected to a MIL 40P connector used for a MELSEC series FCN 40P connector type I/O module or other modules.
- Merit.3
- Pulling the cable vertically prevents poor contact, disconnection, or other faults caused by the tension at the upper end of the core wire of the cable from the FCN 40P connector.
- Merit.4
- This cable cannot be used for a general-purpose 40-point junction terminal block.
- Merit.5
- Cable lengths other than lengths of standard cables are also available.
(Please contact your local Mitsubishi representative for applicable models
and the maximum length.)
| Sales status | On sale |
|---|
Basic specifications
| Item | Specifications | |
|---|---|---|
| Model | FA-CBL100FMV | |
| Category | Time and wire saving devices | |
| Connected device | Programmable controller | |
| Series of connected devices | MELSEC iQ-R | |
| MELSEC-Q | ||
| MELSEC-L | ||
| Product category | Connection cable | |
| Delivery date | - | |
Specifications
General specifications
| Item | Specifications | |
|---|---|---|
| Operating ambient temperature | 0 to 55℃ | |
| Storage ambient temperature | -25 to 75℃ | |
| Operating ambient humidity | 5 to 95%RH, no condensation | |
| Storage ambient humidity | 5 to 95%RH, no condensation | |
| Vibration resistance ( With intermittent vibration ) | 5 to 8.4Hz : Half amplitude 3.5mm | |
| 8.4 to 150Hz : Acceleration 9.8m/s2 | ||
| Number of sweeps : 10 times in each direction X, Y, and Z | ||
| Vibration resistance ( With continual vibration ) | 5 to 8.4Hz : Half amplitude 1.75mm | |
| 8.4 to 150Hz : Acceleration 4.9m/s2 | ||
| Shock resistance | 147m/s2, 3 times in each direction X, Y, and Z(Applicable standards : JIS B 3502 , IEC61131-2) | |
| Operating atmosphere | Free of corrosive gases | |
| Operating altitude *1 | 2000m or less | |
| Overvoltage category *2 | II or less | |
| Pollution degree *3 | 2 or less | |
| Precautions | *1 Do not use or store the module under pressure higher than the atmospheric pressure at an altitude of 0 meters. Doing so may cause malfunction. When using the module under pressure, please consult your local Mitsubishi Electric representative. |
|
| *2 This indicates the assumption that the equipment is connected to a power distribution system, ranging from a public electrical power distribution network down to machinery within the premises. Category II applies to equipment for which electrical power is supplied from fixed facilities. The surge voltage withstand level for equipment with the rated voltage of up to 300V is 2500V. | ||
| *3 This index indicates the degree to which conductive material is generated in terms of the environment in which the equipment is used. In pollution degree 2, only nonconductive pollution occurs. A temporary conductivity caused by condensation must be expected occasionally. |
||
Product specifications
| Item | Specifications | |
|---|---|---|
| Programmable controller side connector | FCN-367J040-AU/MW manufactured by FUJITSU COMPONENT LIMITED | |
| Module side connector | D7940-7500SC, D3448-7940 manufactured by 3M Japan Limited | |
| Cable | 40-core cable (color: black) | |
| Nominal cross sectional area of conductor | 0.08mm2 (#28AWG) | |
| Conductor configuration | 7 wires/0.127mm | |
| Insulator outer diameter | 0.88mm | |
| Cable outer diameter | 9.5mm | |
| Rated current | 1A | |
| Conductor resistance (20°C) | 0.232Ω/m or less | |
| Withstand voltage | 500VAC for 1 minute | |
| Insulation resistance | 5MΩ-km or more | |
| UL standard (cable area) | UL STYLE NO 2464 80°C 300V | |
| Cable length | 10ｍ | |
| Weight(g) | Approx. 1160 | |
External Dimensions・Product CAD Data
External Dimensions
| Name | Filename |
|---|---|
| Dimensions（46KB） | sales_fa_meefan_fa-cbl100fmv_outline_1.pdf |
Product CAD Data
N/A
| Name | Filename |
|---|
Wiring diagrams and connection examples・Note
Wiring diagrams and connection examples
N/A
| Name | Filename |
|---|
Other Technical Information
N/A
| Name | Filename |
|---|
Precautions for use
N/A
| Name | Filename |
|---|
Catalogs・New Product Releases
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|---|---|---|
| MELSEC系列专用 中继端子排（861KB） | Simplified Chinese | MEIC230C_22X-A | February 2025 |
| FA Goods General Catalog Digest edition（28MB） | English | MEIC198E_209-B | March 2024 |
| FA关联产品 综合目录 摘要版（29MB） | Simplified Chinese | MEIC199C_209-B | March 2024 |
| FA Goods General Catalog Time and Wire Saving Devices（79MB） | English | MEIC202E_20Z-E | November 2024 |
Manual
N/A
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|
Technical information（Technical News）
N/A
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|
Downloads
N/A
Profile/module FB (function block)
| Name | Filename |
|---|
Control & Communication System Profile CSP+
| Name | Filename |
|---|
Sample program
| Name | Filename |
|---|
Video
N/A
Related products
Connection cables
| Model | Length | Name | Overview |
|---|
Related products
N/A
