- Between positioning modules and servo amplifier
FA-LTBQ75DP
- Features
- Specifications
- External Dimensions・
Product CAD Data - Wiring diagrams and connection examples・
Note - Catalogs・
New Product Releases - Manual
- Technical information
（Technical News） - Downloads
- Video
- Related products
Features
-
- Product overview:
- The junction terminal block helps signal transmissions between a programmable controller and devices such as sensors in connection methods suitable for applications.
- Merit.1
- Positioning signals are converted into terminal block outputs, enabling easy wiring of devices.
- Merit.2
- The marking strip can reduce wiring mistakes.
| Sales status | On sale |
|---|
Basic specifications
| Item | Specifications | |
|---|---|---|
| Model | FA-LTBQ75DP | |
| Category | Time and wire saving devices | |
| Connected device | Programmable controller | |
| Series of connected devices | MELSEC iQ-R | |
| MELSEC-Q | ||
| Product category | Junction terminal block for programmable controller | |
| Terminal block type | Screw terminal type | |
Specifications
General specifications
| Item | Specifications | |
|---|---|---|
| Operating ambient temperature | 0 to 55℃ | |
| Storage ambient temperature | -25 to 75℃ | |
| Operating ambient humidity | 5 to 95%RH, no condensation | |
| Storage ambient humidity | 5 to 95%RH, no condensation | |
| Vibration resistance ( With intermittent vibration ) | 5 to 8.4Hz : Half amplitude 3.5mm | |
| 8.4 to 150Hz : Acceleration 9.8m/s2 | ||
| Number of sweeps : 10 times in each direction X, Y, and Z | ||
| Vibration resistance ( With continual vibration ) | 5 to 8.4Hz : Half amplitude 1.75mm | |
| 8.4 to 150Hz : Acceleration 4.9m/s2 | ||
| Shock resistance | 147m/s2, 3 times in each direction X, Y, and Z(Applicable standards : JIS B 3502, IEC61131-2) | |
| Operating atmosphere | Free of corrosive gases | |
| Operating altitude *1 | 2000m or less | |
| Installation location | Inside the control panel | |
| Overvoltage category *2 | II or less | |
| Pollution degree *3 | 2 or less | |
| Precautions | *1 Do not use or store the module under pressure higher than the atmospheric pressure at an altitude of 0 meters. Doing so may cause malfunction. When using the module under pressure, please consult your local Mitsubishi Electric representative. |
|
| *2 This indicates the assumption that the equipment is connected to a power distribution system, ranging from a public electrical power distribution network down to machinery within the premises. Category II applies to equipment for which electrical power is supplied from fixed facilities. The surge voltage withstand level for equipment with the rated voltage of up to 300V is 2500V. | ||
| *3 This index indicates the degree to which conductive material is generated in terms of the environment in which the equipment is used. In pollution degree 2, only nonconductive pollution occurs. A temporary conductivity caused by condensation must be expected occasionally. |
||
Product specifications
| Item | Specifications | |
|---|---|---|
| No. of axes supported | 2 (Use two terminal blocks to support 4 axes, and four terminal blocks to support 8 axes.) | |
| Terminal block : Terminal screw | M3 screws, 7.62mm pitch | |
| Terminal block : Applicable wire, tightening torque | 0.3 to 2mm2 (with solderless terminal used), 50 to 75N-cm (5.2 to 7.6kgf·cm) | |
| Connector : Positioning module side | MIL 40P connector | |
| Connector : Servo amplifier side | MDR14P side connector × 2 | |
| Module installation : Screw type | M4 × 0.7mm × 8mm or more, tightening torque: 78 to 118N-cm (8 to 12kgf·cm) | |
| Module installation : DIN rail installation | Applicable DIN rails: TH35-7.5Fe, TH35-7.5AL (IEC 60715 compliant) | |
| Withstand voltage, insulation resistance | 500VAC for 1 minute (between all DC external terminals and ground) | |
| Weight | Approx. 140g | |
| Precautions | When connecting cables to the module, push the cable connector until it is locked. Failure to do so may cause poor contact. | |
| To connect the differential driver common terminal (third/fourth axis side connector) of the RD75D2/4, use the PULSER B- and PULSER A- terminals (No.1 and No.3). | ||
External Dimensions・Product CAD Data
External Dimensions
| Name | Filename |
|---|---|
| Dimensions（82KB） | sales_fa_meefan_fa-ltbq75dp_outline_1.pdf |
Product CAD Data
| Name | Filename |
|---|---|
| Dimensions（CAD 2D） | sales_fa_meefan_fa-ltbq75dp.dxf（382KB） |
Wiring diagrams and connection examples・Note
Wiring diagrams and connection examples
N/A
| Name | Filename |
|---|
Other Technical Information
N/A
| Name | Filename |
|---|
Precautions for use
N/A
| Name | Filename |
|---|
Catalogs・New Product Releases
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|---|---|---|
| FA Goods General Catalog Digest edition（28MB） | English | MEIC198E_209-B | March 2024 |
| FA关联产品 综合目录 摘要版（29MB） | Simplified Chinese | MEIC199C_209-B | March 2024 |
| FA Goods General Catalog Time and Wire Saving Devices（79MB） | English | MEIC202E_20Z-E | November 2024 |
Manual
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|---|---|---|
| User’s Manual（513KB） | English | 50D-FG0235E-A | March 2020 |
Technical information（Technical News）
N/A
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|
Downloads
N/A
Profile/module FB (function block)
| Name | Filename |
|---|
Control & Communication System Profile CSP+
| Name | Filename |
|---|
Sample program
| Name | Filename |
|---|
Video
N/A
Related products
Connection cables
| Model | Length | Name | Overview |
|---|---|---|---|
| FA-CBL05Q7 | 0.5m | Connection cable between positioning module and junction terminal block | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL10Q7 | 1.0m | Connection cable between positioning module and junction terminal block | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBLQ7DM1J3 | 1.0m | Connection cable between junction terminal block and servo amplifier (for Mitsubishi Electric MR-J4-A/J3-A series) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBLQ7PM1J3 | 1.0m | Connection cable between junction terminal block and servo amplifier (for Mitsubishi Electric MR-J4-A/J3-A series) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBLQ7DG1 | 1.0m | Connection cable between junction terminal block (for general-purpose stepping motors and servo amplifiers) and servo amplifier | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
Related products
N/A
