- For MELSEC-L CPU module with built-in I/O function (positioning function)
FA-PT1LBD
- Features
- Specifications
- External Dimensions・
Product CAD Data - Wiring diagrams and connection examples・
Note - Catalogs・
New Product Releases - Manual
- Technical information
（Technical News） - Downloads
- Video
- Related products
Features
-
- Product overview:
- The junction terminal block helps signal transmissions between a programmable controller and devices such as sensors in connection methods suitable for applications.
- Merit.1
- This product converts outputs into the differential driver outputs, improving the external-noise resistance.
- Merit.2
- The maximum wiring length to a drive unit is 10m, which allows more flexible installation of units.
| Sales status | On sale |
|---|
Basic specifications
| Item | Specifications | |
|---|---|---|
| Model | FA-PT1LBD | |
| Category | Time and wire saving devices | |
| Connected device | Programmable controller | |
| Series of connected devices | MELSEC-L | |
| Product category | Junction terminal block for programmable controller | |
| Terminal block type | Screw terminal type | |
Specifications
General specifications
| Item | Specifications | |
|---|---|---|
| Operating ambient temperature | 0 to 55℃ | |
| Storage ambient temperature | -25 to 75℃ | |
| Operating ambient humidity | 5 to 95%RH, no condensation | |
| Storage ambient humidity | 5 to 95%RH, no condensation | |
| Vibration resistance ( With intermittent vibration ) | 5 to 8.4Hz : Half amplitude 3.5mm | |
| 8.4 to 150Hz : Acceleration 9.8m/s2 | ||
| Number of sweeps : 10 times in each direction X, Y, and Z | ||
| Vibration resistance ( With continual vibration ) | 5 to 8.4Hz : Half amplitude 1.75mm | |
| 8.4 to 150Hz : Acceleration 4.9m/s2 | ||
| Shock resistance | 147m/s2, 3 times in each direction X, Y, and Z(Applicable standards : JIS B 3502, IEC61131-2) | |
| Operating atmosphere | Free of corrosive gases | |
| Operating altitude *1 | 2000m or less | |
| Installation location | Inside the control panel | |
| Overvoltage category *2 | II or less | |
| Pollution degree *3 | 2 or less | |
| Precautions | *1 Do not use or store the module under pressure higher than the atmospheric pressure at an altitude of 0 meters. Doing so may cause malfunction. When using the module under pressure, please consult your local Mitsubishi Electric representative. |
|
| *2 This indicates the assumption that the equipment is connected to a power distribution system, ranging from a public electrical power distribution network down to machinery within the premises. Category II applies to equipment for which electrical power is supplied from fixed facilities. The surge voltage withstand level for equipment with the rated voltage of up to 300V is 2500V. | ||
| *3 This index indicates the degree to which conductive material is generated in terms of the environment in which the equipment is used. In pollution degree 2, only nonconductive pollution occurs. A temporary conductivity caused by condensation must be expected occasionally. |
||
Product specifications
| Item | Specifications | |
|---|---|---|
| PULSE F/R output specifications : Output | Differential drivers equivalent to the AM26C31 | |
| PULSE F/R output specifications : Maximum output pulse | 200kpps | |
| PULSE F/R output specifications : Pulse width | 2.0us or more | |
| PULSE F/R output specifications : Maximum connection distance with drive module | 10m | |
| Power supply for command pulse signals | 24V+-10%, 50mA or less | |
| PG0/CHG/DOG/FLS/RLS input specifications | Depends on MELSEC-L CPU module with built-in I/O function (positioning function) | |
| READY input specifications | Depends on MELSEC-L CPU module with built-in I/O function (positioning function) | |
| CLEAR output specifications | Depends on MELSEC-L CPU module with built-in I/O function (positioning function) | |
| Module power supply | 24VDC+-10% (ripple ratio: within 5%) | |
| Module current consumption | Approx. 40mA at 24VDC (not including current consumption of programmable controller) | |
| Terminal block : Terminal screw | M3 screws, number of terminals: 25P, 7.62mm pitch, spring-up screw with finger protection cover | |
| Terminal block : Applicable wire, tightening torque | 0.5 to 1.25mm2, 58.8 to 88.2N-cm (6 to 9kgf·cm) | |
| Module installation : Screw type | M4 × 0.7mm × 16mm or more, tightening torque: 78 to 108N-cm (8 to 11kgf·cm) | |
| Module installation : DIN rail installation | Applicable DIN rails: TH35-7.5Fe, TH35-7.5AL (IEC 60715 compliant) | |
| Withstand voltage, insulation resistance | Between power supply and signal: 500VAC for 1 minute, 10MΩ or more | |
| Weight | Approx. 170g | |
| Precautions | *: For wiring to the terminal block, refer to the manual of the MELSEC-L CPU module to be connected, published by Mitsubishi Electric. | |
External Dimensions・Product CAD Data
External Dimensions
| Name | Filename |
|---|---|
| Dimensions（61KB） | sales_fa_meefan_fa-pt1lbd_outline_1.pdf |
Product CAD Data
| Name | Filename |
|---|---|
| Dimensions（CAD 2D） | sales_fa_meefan_fa-pt1lbd.dxf（1MB） |
Wiring diagrams and connection examples・Note
Wiring diagrams and connection examples
N/A
| Name | Filename |
|---|
Other Technical Information
N/A
| Name | Filename |
|---|
Precautions for use
N/A
| Name | Filename |
|---|
Catalogs・New Product Releases
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|---|---|---|
| FA Goods General Catalog Digest edition（28MB） | English | MEIC198E_209-B | March 2024 |
| FA关联产品 综合目录 摘要版（29MB） | Simplified Chinese | MEIC199C_209-B | March 2024 |
| FA Goods General Catalog Time and Wire Saving Devices（79MB） | English | MEIC202E_20Z-E | November 2024 |
Manual
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|---|---|---|
| User’s Manual（372KB） | English | 50D-FA9010-135E-C | September 2014 |
| EMC and Low Voltage Directives Compliant Manual（256KB） | English | 50D-FA9010-108E-G | December 2023 |
Technical information（Technical News）
N/A
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|
Downloads
N/A
Profile/module FB (function block)
| Name | Filename |
|---|
Control & Communication System Profile CSP+
| Name | Filename |
|---|
Sample program
| Name | Filename |
|---|
Video
N/A
Related products
Connection cables
| Model | Length | Name | Overview |
|---|---|---|---|
| FA-SCBL10FM2LV-LB | 1.0m | Connection cable between MELSEC-L CPU module with built-in I/O and junction terminal block | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
Related products
N/A
