Features
-
- Product overview:
-
The junction terminal block helps signal transmissions between a programmable controller and devices such as sensors in connection methods suitable for applications.
- Merit.1
- Wiring is easy as signals are converted into terminal block outputs.
Basic specifications
| Item |
Specifications |
| Model | FA-LTB40ADGN |
| Category | Time and wire saving devices |
| Connected device | Programmable controller |
| Series of connected devices | MELSEC iQ-R |
| MELSEC-Q |
| Product category | Junction terminal block for programmable controller |
| Terminal block type | Screw terminal type |
Specifications
General specifications
| Item |
Specifications |
| Operating ambient temperature | 0 to 55℃ |
| Storage ambient temperature | -25 to 75℃ |
| Operating ambient humidity | 5 to 95%RH, no condensation |
| Storage ambient humidity | 5 to 95%RH, no condensation |
| Vibration resistance ( With intermittent vibration ) | 5 to 8.4Hz : Half amplitude 3.5mm |
| 8.4 to 150Hz : Acceleration 9.8m/s2 |
| Number of sweeps : 10 times in each direction X, Y, and Z |
| Vibration resistance ( With continual vibration ) | 5 to 8.4Hz : Half amplitude 1.75mm |
| 8.4 to 150Hz : Acceleration 4.9m/s2 |
| Shock resistance | 147m/s2, 3 times in each direction X, Y, and Z(Applicable standards : JIS B 3502, IEC61131-2) |
| Operating atmosphere | Free of corrosive gases |
| Operating altitude *1 | 2000m or less |
| Installation location | Inside control panel |
| Overvoltage category *2 | II or less |
| Pollution degree *3 | 2 or less |
| Precautions | *1 Do not use or store the module under pressure higher than the atmospheric pressure at an altitude of 0 meters. Doing so may cause malfunction. When using
the module under pressure, please consult your local Mitsubishi Electric representative. |
| *2 This indicates the assumption that the equipment is connected to a power distribution system, ranging from a public electrical power distribution network down to machinery within the premises. Category II applies to equipment for which electrical power is supplied from fixed facilities. The surge voltage withstand level for equipment with the rated voltage of up to 300V is 2500V. |
*3 This index indicates the degree to which conductive material is generated in terms of the environment in which the equipment is used. In pollution degree 2, only nonconductive
pollution occurs. A temporary conductivity caused by condensation must be expected occasionally. |
Product specifications
| Item |
Specifications |
| Terminal block : Terminal screw | M3 screws, 7.62mm pitch |
| Terminal block : Applicable wire, tightening torque | 0.3 to 2mm2 (with solderless terminal used), 50 to 75N-cm (5.2 to 7.6kgf-cm) |
| Installation method : Screw type | M4 × 0.7mm × 8mm or more, tightening torque: 78 to 118N-cm (8 to 12kgf-cm) |
| Installation method : DIN rail | Applicable DIN rails: TH35-7.5Fe, TH35-7.5AL (IEC 60715 compliant) |
| Withstand voltage, insulation resistance | Between channels: 1000VAC for 1 minute, 10MΩ or more, Other: 500VAC for 1 minute, 10MΩ or more |
| Weight(g) | Approx. 240g |
External Dimensions・Product CAD Data
External Dimensions
Product CAD Data
Wiring diagrams and connection examples・Note
Wiring diagrams and connection examples
N/A
Other Technical Information
N/A
Precautions for use
N/A
Catalogs・New Product Releases
* The table can be scrolled to the right.
Manual
* The table can be scrolled to the right.
Technical information（Technical News）
N/A
* The table can be scrolled to the right.
Downloads
N/A
Profile/module FB (function block)
Control & Communication System Profile CSP+
Sample program
Related products
Connection cables
| Model |
Length |
Name |
Overview |
| FA-CBL05Q68ADGN |
0.5m |
Connection cable for isolated analog I/O module |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL20Q68ADGN |
2.0m |
Connection cable for isolated analog I/O module |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL10Q68ADGN |
1.0m |
Connection cable for isolated analog I/O module |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL30Q68ADGN |
3.0m |
Connection cable for isolated analog I/O module |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
Related products
- Short-circuit bar for 7.62mm pitch M3-screw terminal block(with/without insulating coating)
- FA-BAR20P-20
The required number of short-circuit bars can be easily cut out along cutting lines.
- Short-circuit bar for 7.62mm pitch M3-screw terminal block(with/without insulating coating)
- FA-BAR20PG-20
The required number of short-circuit bars can be easily cut out along cutting lines.
