Features
-
- Product overview:
-
Analog signals from the connected devices such as sensors can be converted to signals suitable for a programmable controller (example: from a temperature signal to a voltage signal). Data from sensors can be visualized easily, and small-scale IoT can be introduced.
- Merit.1
- This module converts a terminal block into a connector which can be connected/removed by one-touch motion.
- Merit.2
- The module can be used for a terminal block type analog module.
Basic specifications
| Item |
Specifications |
| Model | FA-Q6TCA |
| Category | Time and wire saving devices |
| Connected device | programmable controller |
| Series of connected devices | MELSEC iQ-R |
| MELSEC-Q |
| Product category | Analog signal converter |
| Delivery date | - |
Specifications
General specifications
| Item |
Specifications |
| Operating ambient temperature | 0 to 55℃ |
| Storage ambient temperature | -25 to 75℃ |
| Operating ambient humidity | 5 to 95%RH, no condensation |
| Storage ambient humidity | 5 to 95%RH, no condensation |
| Vibration resistance ( With intermittent vibration ) | 5 to 8.4Hz : Half amplitude 3.5mm |
| 8.4 to 150Hz : Acceleration 9.8m/s2 |
| Number of sweeps : 10 times in each direction X, Y, and Z |
| Vibration resistance ( With continual vibration ) | 5 to 8.4Hz : Half amplitude 1.75mm |
| 8.4 to 150Hz : Acceleration 4.9m/s2 |
| Shock resistance | 147m/s2, 3 times in each direction X, Y, and Z(Applicable standards :JIS B 3502, IEC61131-2) |
| Operating atmosphere | Free of corrosive gases |
| Operating altitude *1 | 2000m or less |
| Installation location | Inside the control panel |
| Overvoltage category *2 | II or less |
| Pollution degree *3 | 2 or less |
| Precautions | *1 Do not use or store the module under pressure higher than the atmospheric pressure at an altitude of 0 meters. Doing so may cause malfunction. When using
the module under pressure, please consult your local Mitsubishi Electric representative. |
| *2 This indicates the assumption that the equipment is connected to a power distribution system, ranging from a public electrical power distribution network down to machinery within the premises. Category II applies to equipment for which electrical power is supplied from fixed facilities. The surge voltage withstand level for equipment with the rated voltage of up to 300V is 2500V. |
*3 This index indicates the degree to which conductive material is generated in terms of the environment in which the equipment is used. In pollution degree 2, only nonconductive
pollution occurs. A temporary conductivity caused by condensation must be expected occasionally. |
Product specifications
| Item |
Specifications |
| Rated voltage | 121VDC / 264VAC |
| Rated current | 2A (for terminals No.1 to No.16) / 8A (for terminals No.17 and No.18) |
| Tightening torque | 66 to 89N·cm (7 to 9kgf·cm) |
| Weight | Approx. 80g |
External Dimensions・Product CAD Data
External Dimensions
Product CAD Data
N/A
Wiring diagrams and connection examples・Note
Wiring diagrams and connection examples
N/A
Other Technical Information
N/A
Precautions for use
N/A
Catalogs・New Product Releases
* The table can be scrolled to the right.
Manual
* The table can be scrolled to the right.
Technical information（Technical News）
* The table can be scrolled to the right.
Downloads
N/A
Profile/module FB (function block)
Control & Communication System Profile CSP+
Sample program
Related products
Connection cables
| Model |
Length |
Name |
Overview |
Related products
N/A
