- MELSEC-dedicated 8-point 3-wire distributed type
FA-TB8XY1
- Features
- Specifications
- External Dimensions・
Product CAD Data - Wiring diagrams and connection examples・
Note - Catalogs・
New Product Releases - Manual
- Technical information
（Technical News） - Downloads
- Video
- Related products
Features
-
- Product overview:
- The junction terminal block helps signal transmissions between a programmable controller and devices such as sensors in connection methods suitable for applications.
- Merit.1
- This product is dedicated to the MELSEC connector-type I/O module and used to branch the 32-point connectors into 8-point units using a cable.
- Merit.2
- As the product has two common terminals (24V and 0V) per two signal terminals, the product can be used with other 16-point distributed type modules.
- Merit.3
- Cross-head screws of terminals are spring-up screws, making round solderless terminal installation easy.
- Merit.4
- The Mitsubishi Electric programmable controller input/output signal (0 to 7, 8 to F, 10 to 17, 18 to 1F) numbers are indicated on the marking strip, making wiring easy.
- Merit.5
- The module can be installed using a DIN rail or screws.
| Sales status | On sale |
|---|
Basic specifications
| Item | Specifications | |
|---|---|---|
| Model | FA-TB8XY1 | |
| Category | Time and wire saving devices | |
| Connected device | Programmable controller | |
| Series of connected devices | MELSEC iQ-R | |
| MELSEC iQ-F | ||
| MELSEC-Q | ||
| MELSEC-F | ||
| MELSEC-L | ||
| Product category | Junction terminal block for programmable controller | |
| Terminal block type | Screw terminal type | |
Specifications
General specifications
| Item | Specifications | |
|---|---|---|
| Operating ambient temperature | 0 to 55℃ | |
| Storage ambient temperature | -25 to 75℃ | |
| Operating ambient humidity | 5 to 95%RH, no condensation | |
| Storage ambient humidity | 5 to 95%RH, no condensation | |
| Vibration resistance ( With intermittent vibration ) | 5 to 84Hz : Half amplitude 3.5mm | |
| 84 to 150Hz : Acceleration 9.8m／s2 | ||
| Number of sweeps : 10 times in each direction X, Y, and Z | ||
| Vibration resistance ( With continual vibration ) | 5 to 84Hz : Half amplitude 1.75mm | |
| 84 to 150Hz : Acceleration 4.9m/s2 | ||
| Shock resistance | 147m/s2, 3 times in each direction X, Y, and Z(Applicable standards : JIS B 3502, IEC61131-2) | |
| Operating atmosphere | Free of corrosive gases | |
| Operating altitude *1 | 2000m or less | |
| Installation location | Inside control panel | |
| Overvoltage category *2 | II or less | |
| Pollution degree *3 | 2 or less | |
| Precautions | *1 Do not use or store the module under pressure higher than the atmospheric pressure at an altitude of 0 meters. Doing so may cause malfunction. When using the module under pressure, please consult your local Mitsubishi Electric representative. |
|
| *2 This indicates the assumption that the equipment is connected to a power distribution system, ranging from a public electrical power distribution network down to machinery within the premises. Category II applies to equipment for which electrical power is supplied from fixed facilities. The surge voltage withstand level for equipment with the rated voltage of up to 300V is 2500V. | ||
| *3 This index indicates the degree to which conductive material is generated in terms of the environment in which the equipment is used. In pollution degree 2, only nonconductive pollution occurs. A temporary conductivity caused by condensation must be expected occasionally. |
||
Product specifications
| Item | Specifications | |
|---|---|---|
| Rated voltage | 24VDC | |
| Voltage | 28.8VDC | |
| Current | 1A (each signal terminal), 2A (each power supply terminal) | |
| Wiring method for common | 8 points / 4 (24V) common points + 4 (0V) common point | |
| Terminal block : Terminal screw | M3 screws, number of terminals: 18P, 7.62mm pitch, spring-up screw with finger protection cover | |
| Terminal block : Applicable wire, tightening torque | 0.3 to 2mm2 (with solderless terminal used), 58.8 to 88.2N-cm (6 to 9kgf-cm) | |
| Installation method : Screw type | M4 × 0.7mm × 20mm or more, tightening torque: 78 to 118N-cm (8 to 12kgf-cm) | |
| Installation method : DIN rail | Applicable DIN rails: TH35-7.5Fe, TH35-7.5AL (IEC 60715 compliant) | |
| No. of points | 8 | |
| I/O device No. | X0 to X7 or Y0 to Y7 | |
| Withstand voltage, insulation resistance | 500VAC for 1 minute, 10MΩ or more (between all DC external terminals and ground, between charged areas) | |
| Weight | Approx. 130g | |
| Precautions | X or Y of the input/output device number is X when an input module is connected, and Y when an output module is connected. The number is determined by the slot where the I/O module is inserted. | |
| When connecting cables to the module, push the cable connector until it is locked. Failure to do so may cause poor contact. | ||
| The total length of cables between I/O modules and distributed type modules (such as FA-CBL**FMV, FA-CBL**MMH) must be 20m or less. | ||
External Dimensions・Product CAD Data
External Dimensions
| Name | Filename |
|---|---|
| Dimensions（104KB） | sales_fa_meefan_fa-tb8xy1_outline_1.pdf |
Product CAD Data
Wiring diagrams and connection examples・Note
Wiring diagrams and connection examples
N/A
| Name | Filename |
|---|
Other Technical Information
N/A
| Name | Filename |
|---|
Precautions for use
N/A
| Name | Filename |
|---|
Catalogs・New Product Releases
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|---|---|---|
| FA Goods General Catalog Digest edition（28MB） | English | MEIC198E_209-B | March 2024 |
| FA关联产品 综合目录 摘要版（29MB） | Simplified Chinese | MEIC199C_209-B | March 2024 |
| FA Goods General Catalog Time and Wire Saving Devices（79MB） | English | MEIC202E_20Z-E | November 2024 |
Manual
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|---|---|---|
| User's Manual（944KB） | English | 50D-FG0228E | March 2018 |
Technical information（Technical News）
N/A
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|
Downloads
N/A
Profile/module FB (function block)
| Name | Filename |
|---|
Control & Communication System Profile CSP+
| Name | Filename |
|---|
Sample program
| Name | Filename |
|---|
Video
N/A
Related products
Connection cables
| Model | Length | Name | Overview |
|---|---|---|---|
| FA-CBL30DMFX | 3ｍ | For MELSEC negative common input (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL05DMFX | 0.5ｍ | For MELSEC negative common input (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL50DMFX | 5ｍ | For MELSEC negative common input (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL20DMFX | 2ｍ | For MELSEC negative common input (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL10DMFX | 1ｍ | For MELSEC negative common input (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL100DMFX | 10ｍ | For MELSEC negative common input (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL05DMFY | 0.5ｍ | For MELSEC source output (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL10DMFY | 1ｍ | For MELSEC source output (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL20DMFY | 2ｍ | For MELSEC source output (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL05FMVE | 0.5ｍ | For MELSEC negative common input (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL10FMVE | 1ｍ | For MELSEC negative common input (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL50DMFY | 5ｍ | For MELSEC source output (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL100DMFY | 10ｍ | For MELSEC source output (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL30DMFY | 3ｍ | For MELSEC source output (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL30FMVE | 3ｍ | For MELSEC negative common input (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL20FMVE | 2ｍ | For MELSEC negative common input (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL150FMV | 15ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL200FMV | 20ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL100MMH | 10ｍ | For connecting distributed type modules, or general-purpose (MIL 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL10MMH | 1ｍ | For connecting distributed type modules, or general-purpose (MIL 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL80MMH | 8ｍ | For connecting distributed type modules, or general-purpose (MIL 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL20MMH | 2ｍ | For connecting distributed type modules, or general-purpose (MIL 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL30MMH | 3ｍ | For connecting distributed type modules, or general-purpose (MIL 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL50MMH | 5ｍ | For connecting distributed type modules, or general-purpose (MIL 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-FCBL30FMH | 3ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (with flat cable) (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL05MMH | 0.5ｍ | For connecting distributed type modules, or general-purpose (MIL 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-FCBL05FMH | 0.5ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (with flat cable) (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-FCBL10FMH | 1ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (with flat cable) (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL20FMH | 2ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-FCBL20FMH | 2ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (with flat cable) (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL30FMH | 3ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL50FMH | 5ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL05FMH | 0.5ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL10FMH | 1ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL100FMV | 10ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL30FMV | 3ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL20FMV | 2ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL50FMV | 5ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL80FMV | 8ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL05FMV | 0.5ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL10FMV | 1ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
Related products
- MELSEC-dedicated 16-point 3-wire distributed type with 4-pole connector
- FA-CB16XY2
The junction terminal block helps signal transmissions between a
programmable controller and devices such as sensors in connection
methods suitable for applications.
- MIL 40P connector cover
- FA-CAP40MIL10
When distributed-type modules are connected using cables, the last module connector is open. The connector cover prevents dust contamination.
- MELSEC-dedicated 16-point 3-wire distributed type
- FA-CB16XY1
The junction terminal block helps signal transmissions between a
programmable controller and devices such as sensors in connection
methods suitable for applications.
- MELSEC-dedicated 8-point 3-wire distributed type
- FA-CB8XY4
The junction terminal block helps signal transmissions between a
programmable controller and devices such as sensors in connection
methods suitable for applications.
- MELSEC-dedicated 8-point 3-wire distributed type
- FA-CB8XY2
The junction terminal block helps signal transmissions between a
programmable controller and devices such as sensors in connection
methods suitable for applications.
- MELSEC-dedicated 8-point 3-wire distributed type
- FA-CB8XY3
The junction terminal block helps signal transmissions between a
programmable controller and devices such as sensors in connection
methods suitable for applications.
- MELSEC-dedicated 8-point 3-wire distributed type
- FA-CB8XY1
The junction terminal block helps signal transmissions between a
programmable controller and devices such as sensors in connection
methods suitable for applications.
- MELSEC-dedicated 16-point 3-wire distributed type
- FA-TB16XY2
The junction terminal block helps signal transmissions between a programmable controller and devices such as sensors in connection methods suitable for applications.
- MELSEC-dedicated 16-point 3-wire distributed type
- FA-TB16XY1
The junction terminal block helps signal transmissions between a programmable controller and devices such as sensors in connection methods suitable for applications.
