- Spring clamp terminal block conversion adapter
FA1-TE40PA
- Features
- Specifications
- External Dimensions・
Product CAD Data - Wiring diagrams and connection examples・
Note - Catalogs・
New Product Releases - Manual
- Technical information
（Technical News） - Downloads
- Video
- Related products
Features
-
- Product overview:
- The junction terminal block helps signal transmissions between a programmable controller and devices such as sensors in connection methods suitable for applications.
- Merit.1
- Front connection does not require any separate terminal block, enabling installation in a small cabinet or inside a system.
- Merit.2
- Uniform connection quality is guaranteed since no soldering skills are required.
- Merit.3
- Signal wires can be rewired easily for extension or repair of systems. The spring clamp type supports large wire sizes.
- Merit.4
- A tester port is provided for continuity check, enabling reduction in time required for startup and maintenance.(The test plug is the reference product.)
- Merit.5
- Using ferrule terminals enables push-in connections.
| Sales status | On sale |
|---|
Basic specifications
| Item | Specifications | |
|---|---|---|
| Model | FA1-TE40PA | |
| Category | Time and wire saving devices | |
| Connected device | Programmable controller | |
| Series of connected devices | MELSEC iQ-R | |
| MELSEC-Q | ||
| MELSEC-L | ||
| Product category | Junction terminal block | |
| Terminal block type | Spring clamp terminal type | |
Specifications
General specifications
| Item | Specifications | |
|---|---|---|
| Operating ambient temperature | 0 to 55°C (when the extended temperature range base unit is not used) 0 to 60°C (when the extended temperature range base unit is used) |
|
| Operating ambient humidity | 5 to 95%RH, no condensation | |
| Vibration resistance ( With intermittent vibration ) | 5 to 8.4Hz : Half amplitude 3.5mm | |
| 8.4 to 150Hz : Acceleration 9.8m/s2 | ||
| Number of sweeps : 10 times in each direction X, Y, and Z | ||
| Vibration resistance ( With continual vibration ) | 5 to 8.4Hz : Half amplitude 1.75mm | |
| 8.4 to 150Hz : Acceleration 4.9m/s2 | ||
| Shock resistance | 147m/s2, 3 times in each direction X, Y, and Z(Applicable standards : JIS B 3502, IEC61131-2) | |
| Operating atmosphere | Free of corrosive gases | |
| Operating altitude *1 | 2000m or less | |
| Installation location | Inside control panel | |
| Overvoltage category *2 | II or less | |
| Pollution degree *3 | 2 or less | |
| Precautions | *1 Do not use or store the module under pressure higher than the atmospheric pressure at an altitude of 0 meters. Doing so may cause malfunction. When using the module under pressure, please consult your local Mitsubishi Electric representative. |
|
| *2 This indicates the assumption that the equipment is connected to a power distribution system, ranging from a public electrical power distribution network down to machinery within the premises. Category II applies to equipment for which electrical power is supplied from fixed facilities. The surge voltage withstand level for equipment with the rated voltage of up to 300V is 2500V. | ||
| *3 This index indicates the degree to which conductive material is generated in terms of the environment in which the equipment is used. In pollution degree 2, only nonconductive pollution occurs. A temporary conductivity caused by condensation must be expected occasionally. |
||
Product specifications
| Item | Specifications | |
|---|---|---|
| Rated voltage | 24VDC(Class2 or SELV+LIM) | |
| Maximum operating voltage | 30VDC(Class2 or SELV+LIM) | |
| Maximum operating current | 0.5A/pt,2A/pt(1A,2A,1B,2B) | |
| Terminal block : Number of terminals | 40 | |
| Terminal block : Wire strip length | 8mm | |
| Withstand voltage, insulation resistance | 500VAC for 1 minute, 10MΩ or more (measured with 500VDC insulation resistance tester) | |
| Applicable wire:Without ferrule(stranded/solid wire) | 0.2 to 1.5 mm2 (24 to 16 AWG) Copper wire with a temperature rating of 75℃ or more |
|
| Applicable wire:Without ferrule(stranded wire) | 0.08 to 0.75mm2（28 to 18 AWG） Copper wire with a temperature rating of 75℃ or more |
|
| 0.20 to 0.29N-m | ||
| 0.43 to 0.57N-m | ||
| External dimensions | 27.4 (W) × 102 (H) × 28 (D) mm | |
| Weight | Approx. 100g | |
| Precautions | *1: Select cables depending on the current value used. | |
| *2: Use a Class2 power supply or an SELV (Safety Extra-Low Voltage) circuit and LIM (Limited Energy Circuit) power supply. | ||
External Dimensions・Product CAD Data
External Dimensions
| Name | Filename |
|---|---|
| 外形寸法図（639KB） | sales_fa_meefan_fa1-te40pa_outline_1.pdf |
Product CAD Data
| Name | Filename |
|---|---|
| 外形寸法図（CAD 2D） | sales_fa_meefan_fa1-te40pa.dxf（5MB） |
Wiring diagrams and connection examples・Note
Wiring diagrams and connection examples
N/A
| Name | Filename |
|---|
Other Technical Information
N/A
| Name | Filename |
|---|
Precautions for use
N/A
| Name | Filename |
|---|
Catalogs・New Product Releases
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|---|---|---|
| Spring Clamp Terminal Block Conversion Adapter（2MB） | English | MEIC196E_209-A | February 2025 |
| FA Goods General Catalog Digest edition（28MB） | English | MEIC198E_209-B | March 2024 |
| FA关联产品 综合目录 摘要版（29MB） | Simplified Chinese | MEIC199C_209-B | March 2024 |
| FA Goods General Catalog Time and Wire Saving Devices（79MB） | English | MEIC202E_20Z-E | November 2024 |
Manual
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|---|---|---|
| User’s Manual（1010KB） | English | 50D-FG0474E-B | October 2023 |
Technical information（Technical News）
N/A
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|
Downloads
N/A
Profile/module FB (function block)
| Name | Filename |
|---|
Control & Communication System Profile CSP+
| Name | Filename |
|---|
Sample program
| Name | Filename |
|---|
Video
N/A
Related products
Connection cables
| Model | Length | Name | Overview |
|---|
Related products
- MELSEC-dedicated 32-point 1-wire type
- FA1-TESV32XY
The junction terminal block helps signal transmissions between a programmable controller and devices such as sensors in connection methods suitable for applications.
- MELSEC-dedicated 16-point 1-wire type
- FA1-TE1SV16XY
The junction terminal block helps signal transmissions between a programmable controller and devices such as sensors in connection methods suitable for applications.
