- MELSEC-dedicated 32-point 1-wire type
FA1-TESV32XY
- Features
- Specifications
- External Dimensions・
Product CAD Data - Wiring diagrams and connection examples・
Note - Catalogs・
New Product Releases - Manual
- Technical information
（Technical News） - Downloads
- Video
- Related products
Features
-
- Product overview:
- The junction terminal block helps signal transmissions between a programmable controller and devices such as sensors in connection methods suitable for applications.
- Merit.1
- This product is dedicated to the MELSEC connector-type I/O module and used to convert 32-point connectors into a 32-point spring
clamp terminal block using a 40-core cable.
- Merit.2
- The vertical type terminal block with 42mm wide contributes to downsizing of system.
- Merit.3
- Retightening work is not required at periodic inspection, as screws do not loose due to vibration.
- Merit.4
- A device such as a 3-wire sensor can be easily connected by placing a common terminal block next to the spring clamp type junction terminal block.
- Merit.5
- Using ferrule terminals enables push-in connections.
| Sales status | Discontinued(3/D/YYYY) |
|---|
Basic specifications
| Item | Specifications | |
|---|---|---|
| Model | FA1-TESV32XY | |
| Category | Time and wire saving devices | |
| Connected device | Programmable controller | |
| Series of connected devices | MELSEC iQ-R | |
| MELSEC-Q | ||
| Product category | Junction terminal block for programmable controller | |
| Terminal block type | Spring clamp terminal type | |
Specifications
General specifications
| Item | Specifications | |
|---|---|---|
| Operating ambient temperature | 0 to 55℃ | |
| Storage ambient temperature | -25 to 75℃ | |
| Operating ambient humidity | 5 to 95%RH, no condensation | |
| Storage ambient humidity | 5 to 95%RH, no condensation | |
| Vibration resistance ( With intermittent vibration ) | 5 to 8.4Hz : Half amplitude 3.5mm | |
| 8.4 to 150Hz : Acceleration 9.8m/s2 | ||
| Number of sweeps : 10 times in each direction X, Y, and Z | ||
| Vibration resistance ( With continual vibration ) | 5 to 8.4Hz : Half amplitude 1.75mm | |
| 8.4 to 150Hz : Acceleration 4.9m/s2 | ||
| Shock resistance | 147m/s2, 3 times in each direction X, Y, and Z(Applicable standards : JIS B 3502, IEC61131-2) | |
| Operating atmosphere | Free of corrosive gases | |
| Operating altitude *1 | 2000m or less | |
| Installation location | Inside control panel | |
| Overvoltage category *2 | II or less | |
| Pollution degree *3 | 2 or less | |
| Precautions | *1 Do not use or store the module under pressure higher than the atmospheric pressure at an altitude of 0 meters. Doing so may cause malfunction. When using the module under pressure, please consult your local Mitsubishi Electric representative. |
|
| *2 This indicates the assumption that the equipment is connected to a power distribution system, ranging from a public electrical power distribution network down to machinery within the premises. Category II applies to equipment for which electrical power is supplied from fixed facilities. The surge voltage withstand level for equipment with the rated voltage of up to 300V is 2500V. | ||
| *3 This index indicates the degree to which conductive material is generated in terms of the environment in which the equipment is used. In pollution degree 2, only nonconductive pollution occurs. A temporary conductivity caused by condensation must be expected occasionally. |
||
Product specifications
| Item | Specifications | |
|---|---|---|
| Rated voltage | 24VDC | |
| Maximum operating voltage | 30VDC | |
| Maximum operating current | Signal: 1A, Common: 2A *1 | |
| Wiring method for common | 32 points/3 (24V) common point + 3 (0V) common point | |
| Terminal block : Number of terminals | 38 | |
| Terminal block : Applicable wire | *2 0.2 to 1.5mm2 (24 to 16AWG), sheath: φ2.8mm or less | |
| Terminal block : Wire strip length | 8 to 9mm (Maximum sheath outside diameter: φ2.8mm or less) | |
| Module installation | Applicable DIN rails: TH35-7.5Fe, TH35-7.5AL (IEC 60715 compliant) | |
| Withstand voltage, insulation resistance | 500VAC for 1 minute, 10MΩ or more (measured with 500VDC insulation resistance tester) | |
| Weight | Approx. 70g | |
| Precautions | *1: Evaluation for UL certification is conducted using a resistance load as a condition. | |
| *2: Evaluation for UL certification is conducted with copper wires. | ||
| When connecting cables to the module, push the cable connector until it is locked. Failure to do so may cause poor contact. | ||
External Dimensions・Product CAD Data
External Dimensions
| Name | Filename |
|---|---|
| Dimensions（128KB） | sales_fa_meefan_fa1-tesv32xy_outline_1.pdf |
Product CAD Data
Wiring diagrams and connection examples・Note
Wiring diagrams and connection examples
N/A
| Name | Filename |
|---|
Other Technical Information
N/A
| Name | Filename |
|---|
Precautions for use
N/A
| Name | Filename |
|---|
Catalogs・New Product Releases
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|---|---|---|
| MELSEC-Dedicated Small-Size Type Spring Clamp Terminal Block Modules（1MB） | English | MEIC150E_187 | July 2020 |
| MELSEC系列专用 中继端子排（861KB） | Simplified Chinese | MEIC230C_22X-A | February 2025 |
| FA Goods General Catalog Digest edition（28MB） | English | MEIC198E_209-B | March 2024 |
| FA关联产品 综合目录 摘要版（29MB） | Simplified Chinese | MEIC199C_209-B | March 2024 |
| FA Goods General Catalog Time and Wire Saving Devices（79MB） | English | MEIC202E_20Z-E | November 2024 |
Manual
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|---|---|---|
| User’s Manual（1MB） | English | 50D-FG0081E-E | September 2020 |
Technical information（Technical News）
N/A
* The table can be scrolled to the right.
| Name | Language | Document No. | Release date |
|---|
Downloads
N/A
Profile/module FB (function block)
| Name | Filename |
|---|
Control & Communication System Profile CSP+
| Name | Filename |
|---|
Sample program
| Name | Filename |
|---|
Video
N/A
Related products
Connection cables
| Model | Length | Name | Overview |
|---|---|---|---|
| FA-CBL05FMV | 0.5ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL10FMV | 1ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL20FMV | 2ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL30FMV | 3ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL50FMV | 5ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL80FMV | 8ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL100FMV | 10ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL150FMV | 15ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL200FMV | 20ｍ | For MELSEC positive common input/sink output (FCN 40P connector and MIL 40P connector) |
Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL05FMVE | 0.5ｍ | For MELSEC negative common input (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL10FMVE | 1ｍ | For MELSEC negative common input (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL20FMVE | 2ｍ | For MELSEC negative common input (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL30FMVE | 3ｍ | For MELSEC negative common input (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL05DMFX | 0.5ｍ | For MELSEC negative common input (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL10DMFX | 1ｍ | For MELSEC negative common input (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL20DMFX | 2ｍ | For MELSEC negative common input (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL30DMFX | 3ｍ | For MELSEC negative common input (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL50DMFX | 5ｍ | For MELSEC negative common input (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL100DMFX | 10ｍ | For MELSEC negative common input (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL05DMFY | 0.5ｍ | For MELSEC source output (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL10DMFY | 1ｍ | For MELSEC source output (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL20DMFY | 2ｍ | For MELSEC source output (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL30DMFY | 3ｍ | For MELSEC source output (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL50DMFY | 5ｍ | For MELSEC source output (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL100DMFY | 10ｍ | For MELSEC source output (D-Sub 37P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL05FMH | 0.5ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL10FMH | 1ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL20FMH | 2ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL30FMH | 3ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-CBL50FMH | 5ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-FCBL05FMH | 0.5ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (with flat cable) (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-FCBL10FMH | 1ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (with flat cable) (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-FCBL20FMH | 2ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (with flat cable) (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
| FA-FCBL30FMH | 3ｍ | For positive common input/sink output of Mitsubishi Electric CC-Link remote I/O module or general-purpose type for OMRON's PLCs (with flat cable) (FCN 40P connector and MIL 40P connector) | Easy wiring, reducing wiring time : A programmable controller and a junction terminal block can be easily wired using the dedicated cable. |
Related products
- MELSEC-dedicated common terminal block
- FA1-TESV38COM
The junction terminal block helps signal transmissions between a programmable controller and devices such as sensors in connection methods suitable for applications.
- MELSEC-dedicated 32-point 1-wire type
- FA1-TE1S32XY
The junction terminal block helps signal transmissions between a programmable controller and devices such as sensors in connection methods suitable for applications.
- MELSEC-dedicated 32-point 1-wire type
- FA1-TESV32XY
The junction terminal block helps signal transmissions between a programmable controller and devices such as sensors in connection methods suitable for applications.
